Neighbourly

"A Leading North West Writing and Production Studio"

Neighbourly Floorplan

Select a viewpoint below to check out the studio
Close Floorplan

Location and Map

From the M6. 

Take the M6 motorway and travel northbound for approximately 32 miles, passing Stoke-on-Trent and Crewe along the way.
At Junction 17, take the exit towards Congleton/A534.
At the roundabout, take the third exit onto the A534 (Sandbach Road).
Continue on the A534 for about 4 miles, passing through Somerford and Brereton.
Upon reaching Congleton, stay on the A534 (now called Manchester Road) as it becomes Mill Street.
Follow Mill Street for about half a mile until you reach a roundabout.
At the roundabout, take the second exit onto Albert Place/A523.
Continue on Albert Place/A523 for approximately 1.5 miles, passing through Lower Heath.
At the roundabout, take the second exit to stay on the A523 (Buxton Road).
Follow the A523 for about 2 miles, and you will arrive at Adelphi Mill on your right-hand side.

 

From the M60.

Join the M60 motorway, which encircles Manchester, from your desired entry point.
Travel on the M60 in the appropriate direction to reach the eastern side of Manchester.
Take the exit at Junction 27, which leads to the A626 toward Stockport/Manchester Airport.
At the roundabout, take the first exit onto the A626 (Queensway).
Continue on the A626 for approximately 6 miles, passing through Stockport and Hazel Grove.
Upon reaching High Lane, turn left onto the A6 (Buxton Road).
Follow the A6 for about 6 miles, passing through Disley and Poynton.
Continue on the A6 until you reach Bollington, and Adelphi Mill will be on your left-hand side.

 

From the M56.

Join the M56 motorway from your desired entry point, heading in the appropriate direction.
Continue on the M56 for approximately 6 miles until you reach Junction 7, where you will exit onto the A556.
Follow the A556 for about 5 miles, passing through Bowdon and Hale.
At the roundabout, take the second exit onto the M56 slip road towards Manchester.
Merge onto the M56 and continue for about 10 miles until you reach Junction 6.
At Junction 6, take the exit onto the A538 toward Wilmslow/Hale/Bolton.
Follow the A538 for approximately 6 miles, passing through Wilmslow.
At the roundabout, take the third exit onto the A34.
Continue on the A34 for about 3 miles, passing through Alderley Edge.
Turn right onto the A537 (Chelford Road) and continue for approximately 5 miles.
At the roundabout, take the first exit onto the A523 (Buxton Road).
Follow the A523 for about 4 miles, and you will arrive at Adelphi Mill on your right-hand side in Bollington.

 

By Train

From London Euston Station, board a train heading to Macclesfield. There are frequent direct services available between these two stations. The journey typically takes around 1 hours and 45 minutes.


Upon arriving at Macclesfield, make your way to the taxi rank, which is conveniently located outside the station.


Ask the taxi driver that you would like to go to Adelphi Mill in Bollington, Cheshire.
The journey usually takes around 10 minutes, but it can vary depending on traffic conditions.

Stay in the loop

Follow @milocostudios
Subscribe to Miloco News

We will send you our monthly newsletter, alongside occasional promotional emails and important updates from the Miloco group. You can unsubscribe at any time. For more details, please review our Privacy Policy.